Grand Caravan V6-3.8L (2009)
1. Install the sliding door glass (2) into the window opening. Make sure the glass is properly positioned within the glass run.
2. Pull the rear glass run into position and install the mounting fasteners.
NOTE: Illustration shown with carrier plate removed for clarity.
3. Working through the close-out plugs in the door module assembly, carefully engage the sliding door glass into the two plastic liftplates (3) located
on the window regulator and secure glass attach nuts.
4. Rotate lower glass channel into position and secure two attach bolts.
5. Install the close-out plugs onto the door module assembly.
6. Install the door trim panel. See: Sliding Door Interior Trim Panel/Service and Repair/Door Trim Panel - Installation.
7. Install the rear applique.
