Grand Caravan V6-3.8L (2009)
Trunk / Liftgate Handle: Service and Repair
Exterior Handle - Installation
INSTALLATION
1. Route the electrical connector of the exterior liftgate handle (2) through the liftgate and position the handle to the outside of the liftgate.
2. Install the two nuts (4) that secure the exterior liftgate handle to the inside of the liftgate. Tighten the nuts to 3 Nm (22 in. lbs.).
3. Connect the wire harness connector (3) to the exterior liftgate handle.
4. Install the power locking latch cable (1) onto the exterior liftgate handle and connect the cable to the handle.
5. Install the liftgate trim panel See: Trunk / Liftgate Interior Trim Panel/Service and Repair/Liftgate Trim Panel - Installation.
