Grand Caravan V6-3.8L (2009)
5. Remove the quarter trim bolster (5).
a. Using a trim stick C-4755 or equivalent, disengage the front and rear quarter trim bolster retaining clips (1).
b. Carefully disengage the quarter trim bolster upper retaining tabs (2) by lifting the bottom edge of the bolster.
c. Continue pulling the quarter trim bolster away from the quarter trim panel to disengage the quarter trim bolster locating tabs (4).
d. Slide the rear seat belt (3) out of the slot in the quarter trim bolster.
e. Remove the quarter trim bolster (5).
6. Remove the left quarter trim panel (5).
a. Remove the third row lower seat belt webbing anchor (4).
b. Remove the third row upper turning loop anchor bolt.
c. Remove the six quarter trim retaining screws.
d. Pull trim from inner quarter panel (1).
e. Disconnect the auxiliary power outlet and power inverter (2) wire harness connectors (3) (if equipped).
f.
Remove the left quarter trim panel (5).
