Grand Caravan V6-3.8L (2009)
Trunk / Liftgate Switch: Service and Repair
D Pillar Switch - Removal
REMOVAL
1. Disconnect and isolate the battery negative cable.
2. Using a trim stick C-4755 or equivalent, disengage the power liftgate D-Pillar switch bezel (1) from the upper D-Pillar trim panel (3).
3. Disconnect the switch electrical connector (4) and remove the switch from the vehicle.
4. Using a trim stick C-4755 or equivalent, carefully disengage the switch bezel retaining tabs and separate the power liftgate D-Pillar switch (5)
from the switch bezel (1).