Grand Caravan V6-3.8L (2009)
Trunk / Liftgate Switch: Service and Repair
D Pillar Switch - Installation
INSTALLATION
1. Position the power liftgate D-Pillar switch (5) into the switch bezel (1) and press into position until the retaining tabs are fully engaged.
2. Position the power liftgate D-Pillar switch bezel (1) into the left rear of vehicle.
3. Connect the switch electrical connector (4).
4. Install the switch bezel (1) into the upper D-Pillar trim panel (3) until retaining tabs (2) are fully engaged.
5. Connect the battery negative cable.
6. Using an appropriate scan tool, check and erase any power liftgate control module diagnostic trouble codes related to the power liftgate D-Pillar
switch.
