Grand Caravan V6-3.8L (2009)
NOTE: Raised plastic edges on each door panel are used to align the hinges to each door panel. Divots in each door panel are used to align the
mounting fasteners holes in the hinge to the door panel and as a starter for the hinge mounting fastener.
1. Place the third load floor panel into position.
2. Install the release latch to the third panel and install the fasteners.
3. Install the fasteners to the third panel (2) to flipper door panel (4) hinge (3).
4. Install the fasteners to the second panel (1) to third panel hinge (6).
5. Install the door assembly to the vehicle.
HINGE - PANEL TO PANEL
NOTE: Raised plastic edges on each door panel are used to align the hinges to each door panel. Divots in each door panel are used to align the
mounting fasteners holes in the hinge to the door panel and as a starter for the hinge mounting fastener.
1. If installing the third panel to the flipper door panel hinge (3), place the hinge into position ensuring that the hinge is aligned and install the hinge
fasteners to the third load floor panel (2) and flipper door panel (4).
