Grand Caravan V6-3.8L (2009)
1. Position the quarter trim bolster (5) into the vehicle and slide the rear seat belt (3) into the slot.
2. Align the locating tabs (4) with the holes in the left quarter trim panel.
3. Carefully engage the quarter trim bolster upper retaining tabs (2) by inserting them into the left quarter trim panel and swinging the bottom edge of
the bolster towards the left quarter trim.
4. Push the quarter trim bolster into the left quarter trim panel until the retaining clips (1) are fully seated.
A-Pillar Trim Panel-Removal
REMOVAL
1. Assist Handle - Passenger Side Only (if equipped) - Remove the screw trim covers and screws from A-pillar.
2. Using trim stick or equivalent, gently pry off the A-pillar trim from A-pillar.
3. Using a small screwdriver or equivalent, press downward disengaging tether clip (2) and slide from housing (1).
A-Pillar Trim Panel-Installation
INSTALLATION
