Grand Caravan V6-3.8L (2009)
Door Lock Cylinder Switch: Service and Repair
Door Lock Cylinder Switch - Installation
INSTALLATION
1. Install the switch on the key cylinder in the door handle.
2. Install the door handle.
3. Connect the door cylinder lock switch wire connector to the door harness, and the wiring clip to the impact beam.
4. Install the door trim panel of the affected door cylinder lock switch See: Doors, Hood and Trunk/Doors/Front Door/Front Door Panel/Service and
Repair/Front Door Trim Panel - Installation.
5. Connect the battery negative cable.
6. Verify system operation.
