Grand Caravan V6-3.8L (2009)
1. On three passenger bench seats, position the seat back panel (1) to the seat back frame and engage the push-in fasteners.
2. On two passenger bench seats, position the seat back panel to the seat back frame and engage the two upper hooks and then the push-in fasteners
that secure the upper corners and lower edge of the panel to the seat (2).
3. On third row bench seats, install grocery bag holder See: Seat Back - Installation.
Second Row, Swivel
REMOVAL
NOTE: Right seat shown in illustrations. Left seat similar.
1. Remove the seat from the vehicle and place it on a workbench.
2. Remove the seat back from the seat See: Seat Back - Removal.
3. Remove the seat back cushion from the seat back frame (3)See: Service and Repair/Removal and Replacement/Seats, First Row/Outer Trim Ring
Panel - Removal.
4. Disengage the two push-pin retainers (1) that secure the bottom of the seat back panel (4) to the seat back frame.
5. Tilt the bottom of the seat back panel away from the seat back frame and disengage the two retaining tabs (5) that secure the top of the panel to the
frame and remove the panel.
