Grand Caravan V6-3.8L (2009)
7. Connect the electrical connector to the seat back recliner motor.
8. Install the seat See: Service and Repair/Removal and Replacement/Seats, First Row/Seat - Installation.
Seat Back Hinge Cover - Removal
REMOVAL
NOTE: Right seat shown. Left seat similar.
NOTE: Inboard seat back hinge cover shown. Outboard cover similar.
1. If servicing the inboard seat back hinge cover (1), remove the recliner handle (3) by pulling it straight rearward and off the lever (2).
2. Using trim stick C-4755 or equivalent, disengage the retaining tabs that secure the bottom of each seat back hinge cover to the seat cushion side
shield (4).
3. Pull the seat back hinge cover upward and away from the top of the seat back hinge and remove the cover.
Seat Back Hinge Cover - Installation
INSTALLATION
NOTE: Right seat shown. Left seat similar.
NOTE: Inboard seat back hinge cover shown. Outboard cover similar.
1. Position the seat back hinge cover (1) to the top of the seat back hinge and install the cover over the hinge.
2. Engage the retaining tabs that secure the bottom of each seat back hinge cover to the seat cushion side shield (4).
3. If servicing the inboard seat back hinge cover, install the recliner handle (3) onto the lever (2).
