Grand Caravan V6-3.8L (2009)
1. Install the seat belt buckle (1) through the seat cushion side shield (2) and position the side shield to the seat.
2. Engage the retaining tabs that secure the front of the seat cushion side shield to the seat by simultaneously sliding the side shield rearward and
down.
3. Engage the retaining tabs that secure the center of the seat cushion side shield to the seat by pushing the center of the shield straight into the side of
the seat.
4. Install the two screws (3) that secure the rear of the seat cushion side shield to the seat. Tighten the screws securely.
Second Row, Swivel - Upper Swivel
INSTALLATION
NOTE: Right seat shown in illustrations. Left seat similar.
NOTE: Outboard side shield shown. Inboard side shield similar.
1. Position each seat cushion side shield (4) to the seat (2) and install the two retaining screws (3 and 5). Tighten the screws securely.
2. Align the recliner handle (1) to the lever that protrudes through the outboard seat cushion side shield and slide the handle rearward onto the lever.
Make sure the handle is fully engaged to the lever.
