Grand Caravan V6-3.8L (2009)
8. Remove the eight spacers (6) from the mounting studs on the seat tracks (1 and 5).
9. Disengage the J-hook retainer (8) that secures the seat cushion cover to the rear of the seat cushion frame (7).
10. Disengage the four J-hook retainers (2 and 4) that secure the seat cushion cover to the sides of the seat cushion frame.
11. Disengage the J-hook retainer (3) that secures the seat cushion cover to the front of the seat cushion frame.
12. Remove the seat cushion and cover from the seat cushion frame.
13. If equipped with heated seats, disconnect the seat cushion wire harness connector located at the rear of the seat frame.
14. Disengage the seat cushion support (1) from the six retaining tabs (9) located on the seat cushion frame (2) by using a small punch or similar tool
as a lever. Place the punch or tool through the six holes in the support and into the corresponding holes in the seat cushion frame, then stretch the
support off the retaining tabs.
15. If equipped, remove the heated seat wire harness (7) from the child seat restraint bracket (6) located at the rear of the seat cushion frame.
16. Remove the three bolts (5) that secure the child seat restraint bracket to the seat cushion frame and remove the bracket.
17. Remove the six bolts (3, 4 ,8 and 10) that secure the seat tracks to the bottom of the seat cushion frame and remove the tracks from the frame.
Swivel Seat Cushion Frame - Installation
INSTALLATION
NOTE: Right seat shown in illustrations. Left seat similar.