Grand Caravan V6-3.8L (2009)
3. For front row seats and 2nd row Fold 'N Go(R)seats connect the new heating element electrical connectors (1, 3 and 4). Passenger seat shown,
driver seat similar.NOTE: Make certain the seat wire harness is correctly routed through the seat and seat back. The excess wire between
the cushion and back elements should be securely tucked between the rear of the cushion foam and the rear carpet flap of the trim cover.
4. For 2nd row Swivel 'N Go(R)seats connect the new heating element electrical connectors (2). NOTE: Make certain the seat wire harness is
correctly routed through the seat and seat back. The seat contact should be securely fastened in place (4) and all wire harness routing
clips should be correctly installed (3).
5. Connect the battery negative cable.
6. Verify heated seat system operation.
