Grand Caravan V6-3.8L (2009)
1. Position the seat so that the heads of the bolts which secure the rear of the seat riser to the track can be accessed.
2. Remove the seat from the vehicle and place it on a workbench See: Service and Repair/Removal and Replacement/Seats, First Row/Seat -
Removal.
3. Remove the inboard seat cushion side shield See: Seat Cushion/Service and Repair/Seat Cushion Side Shields - Removal.
4. Remove the push-pin retainers (1) that secure the two elastic straps (4) of the seat bottom closeout (3) to the bottom of the seat cushion frame (2)
and remove the closeout.
NOTE: Heated seat shown. Non-heated seat similar.
5. If equipped, remove the heated seat module (4) from the bottom of the seat cushion frame (3).
6. Disconnect the wire harness connectors from the power seat motors (1) and the seat track position sensor (8) and remove the wire harness (7) from
the bottom of the seat cushion frame and the seat riser (9).
7. If required, remove the seat track position sensor from the seat track.
8. Remove the bolt (2) that secures the four seat track mounting brackets (3) to the bottom of the seat cushion frame.
9. Disengage the seat track mounting brackets from the bottom of the seat cushion frame and remove the seat track assembly (6) from the frame.
