Grand Caravan V6-3.8L (2009)
Power Seat Switch: Service and Repair
Power Seat Switch - Installation
Front
INSTALLATION
1. Position the power seat switch (2) onto the seat cushion side shield (3). Gently apply pressure to the switch until the four mounting tabs (1) are
fully seated into place.
2. Connect the power seat switch electrical connector (4).
3. Install the seat cushion side shield, See: Seats/Seat Cushion/Service and Repair/Seat Cushion Side Shields - Installation.
4. Connect the battery negative cable.
5. Verify normal operation of the power seat assembly.
Third Row - Seat Recliner Switch
INSTALLATION
NOTE: The procedure for replacing the seat recliner switch is the same for both the 60 and 40 third row power folding seats. The following
steps should be performed only on the seat with the inoperative seat recliner switch.