Grand Caravan V6-3.8L (2009)
Trunk / Liftgate Switch: Service and Repair
Overhead Console Switch - Removal
REMOVAL
1. Disconnect and isolate the battery negative cable.
2. Using a trim stick C-4755 or equivalent, disengage the retaining clips at the front edge of the overhead console (1).
3. Once the front edge is released use your fingertips to grasp the sides of the overhead console (2) and pull straight down evenly to disengage the
remaining two retaining clips from the mounting bracket.
4. Lower the overhead console far enough to access the wire harness connectors.
5. If equipped, disconnect the courtesy lamps (2), Light Emitting Diode (LED) lamp (3), infrared temperature sensor (4) and power sliding
door/liftgate switch (1) electrical connectors.
6. Remove the overhead console assembly from the vehicle.
