Grand Caravan V6-3.8L (2009)
8. Pass the leading end of the rear cable (3 or 4) through the hole in the end of the intermediate bracket (1). Press the cable housing retainer through
the hole until the fingers on the retainer lock it into place.
9. Attach the equalizer to all three parking brake cables and reset the automatic adjuster tension on the cables. See: Service and Repair
10. Install tire and wheel assembly (1) See: Maintenance/Wheels and Tires/Service and Repair/Removal and Replacement/Tires and Wheels -
Installation. Install and tighten wheel mounting nuts (3) to 135 Nm (100 ft. lbs.).
11. Lower the vehicle.
12. Apply and release park brake pedal one time. This will seat the parking brake cables and allow the automatic adjuster in the parking brake lever
mechanism to correctly tension the parking brake cables.
13. Check operation of parking brakes.
