Grand Caravan V6-3.8L (2009)
Yaw Rate Sensor: Service and Repair
Dynamics Sensor - Installation
INSTALLATION
NOTE: When installed, arrow on dynamics sensor housing must point towards front of vehicle.
1. Position the dynamics sensor (2) on the mounting bracket (4) with the arrow pointing to the front of the vehicle and the connector facing the
passenger side of the vehicle.
2. Install the two mounting screws (1). Tighten the screws to 9 Nm (80 in. lbs.).
3. Connect the wiring harness connector (3) to the dynamics sensor (1).
4. Install the right intermediate floor distribution duct (2).
