Grand Caravan V6-3.8L (2009)
6. Tighten cylinder head cover bolts (2) to 12 Nm (105 in. lbs.).
NOTE: Be sure that the PVC valve is properly seated inside the cylinder head cover protrusion and the PCV valve hose completely covers the
protrusion of the PCV valve housing.
7. Connect PCV hose (1) to cylinder head cover.
8. Connect spark plug wires to spark plugs.
9. Install wiper module. See: Wiper and Washer Systems/Wiper Motor Linkage/Service and Repair/Wiper Arm Linkage - Installation.
10. Connect negative cable to battery.
