dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Blend Door Actuator - Removal|Page 6102 > < Blend Door Actuator - Removal|Page 6100
Page 2
background image

2. Remove rear heater-A/C housing (1) and place it on a workbench .
3. Disconnect the wire harness connector (2) from the rear mode door actuator (3).
4. Remove the two screws (4) that secure the rear mode door actuator to the back of the rear heater-A/C housing and remove the actuator.

Blend Door Actuator - Removal|Page 6102 > < Blend Door Actuator - Removal|Page 6100