dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Defroster Duct - Removal|Page 6141 > < Defroster Duct - Removal|Page 6139
Page 5
background image

1. Disconnect and isolate the negative battery cable.
2. Remove the center bezel from the instrument panel.
3. Remove the screw (1 and 5) that secures each center instrument panel duct (2 and 4) to the instrument panel support (6).

NOTE: If the foam seal on each center instrument panel duct is deformed or damaged, it must be replaced.

4. Disconnect the center instrument panel ducts from the center distribution duct (3) and remove the center ducts from the vehicle.

OUTBOARD AND CENTER DISTRIBUTION DUCTS

NOTE: Take the proper precautions to protect the front face of the instrument panel from cosmetic damage during this service procedure.

1. Disconnect and isolate the negative battery cable.

NOTE: It is not necessary to remove the front HVAC housing from the vehicle when servicing the instrument panel ducts. The instrument

panel should be removed separately.

2. Remove the instrument panel and place it on a workbench.
3. Remove the instrument panel cover.
4. Remove the screws (1 and 4) that secure the passenger side instrument panel duct (2) and the demister duct (3) to the instrument panel support (5).

Defroster Duct - Removal|Page 6141 > < Defroster Duct - Removal|Page 6139