dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

A/C and Heater Control - Removal|Page 6288 > < A/C and Heater Control - Removal
Page 2
background image

Reconnecting a connector to the wrong receptacle can damage the A/C-heater control system.

2. Remove the center bezel (3) from the instrument panel and place it on a workbench.
3. Remove the four screws (1) that secure the A/C-heater control (2) to the instrument panel center bezel and remove the control.

Rear

REMOVAL

NOTE: Take the proper precautions to protect the face of the overhead console from cosmetic damage during this service procedure.

1. Disconnect and isolate the negative battery cable.
2. Remove the rear overhead console (3) and place it on a workbench.
3. Disconnect the wire harness connector (2) from the back of the rear A/C-heater control (1).
4. Remove the two screws (4) that secure the rear A/C-heater control to the rear overhead console and remove the control.

A/C and Heater Control - Removal|Page 6288 > < A/C and Heater Control - Removal