Grand Caravan V6-3.8L (2009)
NOTE: Illustration shown with rear body cradle removed for clarity.
1. Recover the refrigerant from the refrigerant system See: Service and Repair/Refrigerant System Recovery.
2. Raise and support the vehicle.
3. Loosen the nuts that secure the underbody refrigerant lines to the underbody refrigerant extension lines (3) located behind the right rear wheel
housing.
4. Disconnect the underbody refrigerant lines from underbody refrigerant extension lines and remove and discard the O-ring seals.
5. Remove the nut (2) that secures the underbody refrigerant extension lines and sealing plate (4) to the rear A/C expansion valve (1).
6. Disconnect the extension lines from the rear A/C expansion valve and remove and discard the O-ring seals.
7. Remove the two bolts (4) that secure the rear A/C expansion valve (2) to the rear A/C evaporator (1), which extends through the rear floor panel
(3).
8. Remove the rear A/C expansion valve from the rear A/C evaporator and remove and discard the O-ring seals.
9. Install plugs in, or tape over the opened underbody refrigerant line fittings and the rear evaporator and expansion valve ports.
