dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Front Blower Motor Power Module - Description|Page 6530 > < Front Blower Motor Power Module C1 (ATC) (HVAC) 4 Way|Page 6527
Page 1
background image

Control Module HVAC: Description and Operation
Front Blower Motor Power Module - Description

DESCRIPTION

A blower motor power module is used on this model when equipped with the automatic temperature control (ATC) heating-A/C system. Models
equipped with the manual temperature control (MTC) heating-A/C system use a blower motor resistor block, instead of the blower motor power module .

The front blower motor power module is mounted to the rear of the HVAC housing, on the passenger side of the vehicle. The blower motor power
module consists of a molded plastic mounting plate (1) with two integral wire connector receptacles (3). Concealed behind the mounting plate is the
power module electronic circuitry and a large finned heat sink (2).

The blower motor power module is accessed for service from underneath the instrument panel.

Front Blower Motor Power Module - Description|Page 6530 > < Front Blower Motor Power Module C1 (ATC) (HVAC) 4 Way|Page 6527