dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Front Lamp Unit - Removal|Page 9861 > < Brake Lamp Relay|Diagrams
Page 1
background image

Headlamp Igniter Module: Service and Repair
Front Lamp Unit - Removal

HID BALLAST MODULE

1. Disconnect and isolate the battery negative cable.
2. Remove front lamp unitSee: Turn Signals/Turn Signal Lamp/Turn Signal Bulb/Service and Repair/Front Lamp Unit - Removal.
3. Remove the 3 screws (1) holding the ballast module to the front lamp unit and remove the ballast module (2).

Front Lamp Unit - Removal|Page 9861 > < Brake Lamp Relay|Diagrams