Grand Caravan V6-3.8L (2009)
4. Rear Right - Measure the distance (3) from the frame rail cross-brace (2) outboard of the exhaust shield to the floor or alignment rack/lift runway
surface. It may be necessary to measure to the bottom of a straight edge (4), placed from lift runway to runway, to get an accurate measurement.
5. Compare the measurements to specifications listed in the following CURB HEIGHT SPECIFICATIONS chart. Maximum left-to-right
differential is not to exceed 12.5 mm (0.5 in.).
6. If curb height is found to be out of specification and there is no sign of excessive body damage, curb height can be changed by replacing the
applicable spring with a spring offering a different check load. See: Steering and Suspension/Suspension/Suspension Strut / Shock
Absorber/Service and Repair/Removal and Replacement/Front Strut / Shock/Removal
CURB HEIGHT SPECIFICATIONS