Grand Caravan V6-3.8L (2009)
11. Remove tie strap clip (1 - overhead view) from right side of cooling module near reservoir end of hose.
NOTE: To release each return hose cooler tube mounting bracket in the following step, push inward on top and bottom clip tabs of cooling
module, then pull mounting bracket away from clip.
12. Push inward on return hose cooler tube (1) mounting clip tabs and remove cooler tube mounting brackets (2) from clips on cooling module.
13. Remove return hose assembly.
Supply Hose
REMOVAL
1. Remove negative (-) battery cable from battery and isolate cable.
2. Remove cap from power steering fluid reservoir.
3. Using a siphon pump, remove as much power steering fluid as possible from power steering fluid reservoir.
