Grand Caravan V6-3.8L (2009)
e. Highlight the flash file that you want to use. Hit "SELECT" and then "OK". Follow the on screen instructions.
f.
Once the flash is complete, verify that the part number at the top of the Flash PCM/ECM screen has updated to the new part number.
NOTE: If this flash process is interrupted or aborted, the flash should be restarted.
11. Continue to Section 2SECTION 2 - ADDITIONAL PCM/ECM / TCM REPLACEMENT PROCEDURES to complete the process if the
ECU has been replaced.
12. Type the necessary information on the "Authorized Modification Label" (p/n 04275086AB) and attach near the VECI label (See Section 3
SECTION 3 - AUTHORIZED MODIFICATION LABEL for details).
SECTION 2 - ADDITIONAL PCM/ECM / TCM REPLACEMENT PROCEDURES
NOTE: Find the PCM/ECM/TCM Type for the vehicle, read and write down the steps, and then go to the step by step instructions for
additional information on how to perform these procedures. STEP-BY-STEP INSTRUCTIONS
If an EDC16-U31 PCM/ECM was replaced, perform the following additional steps and/or routines:
1. PCM/ECM Replaced - if WIN equipped
2. Check PCM/ECM VIN - if NOT WIN equipped
3. Program Variant Code
If an EDC16-C2 PCM/ECM was replaced, perform the following additional steps and/or routines:
1. PCM/ECM Replaced - if WIN equipped
2. Check PCM/ECM VIN - if NOT WIN equipped
3. IMA Rapid Calibration Test - Only on 06 PT AND up
4. Injector Quantity Adjustment - Only on 06 PT AND up
