Grand Caravan V6-3.8L (2009)
Ignition Switch: Service and Repair
Wireless Ignition Node Receiver - Removal
REMOVAL
WARNING: Wait two minutes for the system reserve capacitor to discharge before servicing any airbag components. Failure to do this may
result in serious or fatal injury.
1. Disconnect and isolate the battery negative cable.
2. Remove the knee blocker, See: Restraint Systems/Knee Diverter/Service and Repair/Kneeblocker - Removal.
3. Remove the instrument bezel.
4. Remove the coaxial electrical cable connector (1) from wireless ignition node (WIN) (3).
5. Remove the electrical connector (2) from wireless ignition node WIN (3).
6. Remove the screws (1) from (WIN) (2) and remove from instrument panel.
