Grand Caravan V6-3.8L (2009)
3. Engage the metal hook (3) that secures the side curtain airbag (5) rear tether to the inner D-pillar (2) near the belt line.
4. Engage the plastic push-in retainer (4) that secures the rear tether to the inner D-pillar (2). Both the hook and the push-in plastic retainer are
secured in the same slotted hole of the D-pillar, but the hook MUST be installed prior to the retainer.
5. Engage the two mounting tabs on the outboard side of the airbag inflator into the two slots of the inflator mounting bracket on the inner roof side
rail just forward of the C-pillar, then engage the two mounting tabs on the inboard side of the inflator over the two weld studs of the mounting
bracket and loosely secure with two nuts.
6. Reconnect the body wire harness connector (1) to the connector receptacle at the front of the side curtain airbag inflator (2).
7. Engage each of the remaining airbag mounting tabs forward of the inflator over the appropriate weld studs on the inner roof side rail and loosely
secure with nuts.
