Grand Caravan V6-3.8L (2009)
1. Remove the second row bench seat from the vehicle.
2. Remove the screw (1) that secures the double seat belt buckle lower anchor (2) to the rear edge of the cushion frame (4) on the underside of the
bench seat.
3. Remove the double buckle unit from the seat.
Second Row Bucket Seat - Except Swivel
SECOND ROW BUCKET SEAT - EXCEPT SWIVEL
WARNING: To avoid serious or fatal injury during and following any seat belt or child restraint anchor service, carefully inspect all seat belts,
buckles, mounting hardware, retractors, tether straps, and anchors for proper installation, operation, or damage. Replace any belt
that is cut, frayed, or torn. Straighten any belt that is twisted. Tighten any loose fasteners. Replace any belt that has a damaged or
ineffective buckle or retractor. Replace any belt that has a bent or damaged latch plate or anchor plate. Replace any child
restraint anchor or the unit to which the anchor is integral that has been bent or damaged. Never attempt to repair a seat belt or
child restraint component. Always replace damaged or ineffective seat belt and child restraint components with the correct, new
and unused replacement parts listed in the Chrysler Mopar(R) Parts Catalog.
1. Remove the side shield and the hinge cover from the inboard side of the seat.
2. Remove the screws (4) that secure the inboard seat back hinge to the seat cushion
