dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Seat Belt Buckle - Removal|Page 6799 > < Seat Belt Buckle - Removal|Page 6797
Page 3
background image

3. Carefully pull the base of the hinge (1) away from the inboard side of the seat cushion frame (3) far enough to disengage the seat belt buckle lower

anchor (2) that is captured between the frame and the hinge.

4. Remove the buckle from the seat.

Second Row Bucket Seat - Swivel

SECOND ROW BUCKET SEAT - SWIVEL

WARNING: To avoid serious or fatal injury during and following any seat belt or child restraint anchor service, carefully inspect all seat belts,

buckles, mounting hardware, retractors, tether straps, and anchors for proper installation, operation, or damage. Replace any belt
that is cut, frayed, or torn. Straighten any belt that is twisted. Tighten any loose fasteners. Replace any belt that has a damaged or
ineffective buckle or retractor. Replace any belt that has a bent or damaged latch plate or anchor plate. Replace any child
restraint anchor or the unit to which the anchor is integral that has been bent or damaged. Never attempt to repair a seat belt or
child restraint component. Always replace damaged or ineffective seat belt and child restraint components with the correct, new
and unused replacement parts listed in the Chrysler Mopar(R) Parts Catalog.

1. Remove the side shield and hinge cover from the inboard side of the seat cushion (4).
2. Remove the screw (3) that secures the seat belt buckle (1) lower anchor to the inboard seat back hinge bracket (2) 
3. Remove the buckle from the seat.

Third Row Bench Double Buckle

THIRD ROW BENCH DOUBLE BUCKLE

WARNING: To avoid serious or fatal injury during and following any seat belt or child restraint anchor service, carefully inspect all seat belts,

buckles, mounting hardware, retractors, tether straps, and anchors for proper installation, operation, or damage. Replace any belt
that is cut, frayed, or torn. Straighten any belt that is twisted. Tighten any loose fasteners. Replace any belt that has a damaged or
ineffective buckle or retractor. Replace any belt that has a bent or damaged latch plate or anchor plate. Replace any child
restraint anchor or the unit to which the anchor is integral that has been bent or damaged. Never attempt to repair a seat belt or
child restraint component. Always replace damaged or ineffective seat belt and child restraint components with the correct, new

Seat Belt Buckle - Removal|Page 6799 > < Seat Belt Buckle - Removal|Page 6797