dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Sensors and Switches - Body and Frame > < Remote Radio Switches - Removal
Page 1
background image

Remote Switch: Service and Repair
Remote Radio Switches - Installation

INSTALLATION

WARNING: ON VEHICLES EQUIPPED WITH AIRBAGS, REFER TO ELECTRICAL, RESTRAINTS BEFORE ATTEMPTING ANY

STEERING WHEEL, STEERING COLUMN, OR INSTRUMENT PANEL COMPONENT DIAGNOSIS OR SERVICE.
FAILURE TO TAKE THE PROPER PRECAUTIONS COULD RESULT IN ACCIDENTAL AIRBAG DEPLOYMENT AND
POSSIBLE PERSONAL INJURY.

1. Install remote radio switch to the steering wheel.
2. Install three screws securing steering wheel rear cover.
3. Connect the wire harness to the remote radio switch.
4. Install the steering wheel. See: Steering and Suspension/Steering/Steering Wheel/Service and Repair/Installation.
5. Install the driver side airbag. See: Restraint Systems/Air Bag Systems/Air Bag/Service and Repair/Removal and Replacement/Driver Air Bag -

Installation.

6. Connect the battery negative cable.

Sensors and Switches - Body and Frame > < Remote Radio Switches - Removal