Grand Caravan V6-3.8L (2009)
10. Remove screw (3) fastening wheel speed sensor routing bracket (2) to knuckle.
11. Remove nut (1) attaching outer tie rod (5) to steering knuckle (2) by holding outer tie rod stud stationary while loosening and removing nut with a
wrench.
12. Remove outer tie rod (3) stud from steering knuckle (1) using Puller (2), Special Tool 9360.
CAUTION: The strut assembly-to-knuckle attaching bolts are serrated and must not be turned during removal. Proper removal is required.
Refer to the following steps for the correct method.
