Grand Caravan V6-3.8L (2009)
5. Install return hose (2) to cooler over return hose (5) from gear tube. Slide hose clamp into position on fluid reservoir and attach it. Be sure hose
clamp is installed past bead on fluid reservoir fitting.
6. Install the lower plastic grille (1) to the vehicle.
7. Install the plastic push pins to the bumper and lower support.
8. Install the air temp sensor onto the lower support. Tighten the bolts to 5.5 Nm (49 in.lbs.).
9. Connect the electrical connector to the air temp sensor (2).
