Grand Caravan V6-3.8L (2009)
Tie Rod End: Service and Repair
Tie Rod End - Removal
Inner Tie Rod
INNER TIE ROD
1. Remove outer tie rod. See:
2. Remove tie rod jam nut from inner tie rod.
3. If servicing right inner tie rod, remove screws and push-pins securing heat shield (1) over right side of steering gear (2). Remove heat shield from
over steering gear bellows.
4. Remove clamp (3) securing bellows (1) to inner tie rod.
5. Remove clamp (2) securing bellows (1) to steering gear body.
6. Remove bellows.
