Grand Caravan V6-3.8L (2009)
Control Arm Bushing: Service and Repair
Front Lower Control Arm Bushings - Installation
INSTALLATION
NOTE: When installing the bushing in the sizer cup 10141-1 (3), use Mopar(R) rubber bushing installation lube Part No. 05010319AA or
equivalent.
1. Using installer 10141 (1) and adapter 10141-5 (2), 10141-1 sizer cup (3), and 10141-3 (4), install the bushing in the lower control arm.
2. Position lower control arm (2) into brackets on suspension crossmember (4).
3. Install front mounting bolt (1) and rear mounting bolt (3) and nut attaching lower control arm to crossmember. Do not tighten front bolt (1) at
this time. Tighten rear mounting bolt nut to 155 Nm (114 ft. lbs.).
