dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Crossmember - Removal|Page 5816 > < Crossmember - Removal|Page 5814
Page 2
background image

3. Install front engine mount thru-bolt (4). Tighten bolt to 57 Nm (42 ft. lbs.).
4. Lower vehicle.

Front Suspension - Bushings

BUSHINGS

FRONT

NOTE: Front (1) and rear (2) bushings are not interchangeable, although they look similar. The rears have an extra step on the bottom of the

inner sleeve that inserts through the sheer bracket and the hole in the inner sleeve is smaller.

1. Place the front bushing (1) into position on the front crossmember.

Crossmember - Removal|Page 5816 > < Crossmember - Removal|Page 5814