Grand Caravan V6-3.8L (2009)
8. Install tire and wheel assembly (1) See: Wheels and Tires/Service and Repair/Removal and Replacement/Tires and Wheels - Installation. Install
and tighten wheel mounting nuts (3) to 135 Nm (100 ft. lbs.).
9. Lower vehicle.
10. Perform wheel alignment as necessary. See: Alignment/Service and Repair
Removal
REMOVAL
NOTE: Before proceeding, See: Service Precautions/Vehicle Damage Warnings.
1. Raise and support vehicle. See: Wheels and Tires/Vehicle Lifting/Service and Repair
2. Position transmission jack or equivalent under axle near shock absorber to be serviced, raising it enough to support axle.
3. Remove the shock absorber lower mounting bolt (4) and nut (3) at axle.
4. Remove the shock absorber upper mounting bolt (2) and nut (1) at body bracket, then remove shock absorber (5) from vehicle.
Installation
INSTALLATION
