Grand Caravan V6-3.8L (2009)
4. Remove the mounting fasteners.
5. Remove the window motor.
MOTOR-VENT WINDOW
1. Disconnect and isolate the battery negative cable.
2. Remove D-pillar trim panel. See: Body and Frame/Interior Moulding / Trim/Trim Panel/Service and Repair/Pillar Trim/D-Pillar Trim/Removal.
3. Disconnect wire connector (1) from power vent motor (3).
4. Using a flat bladed tool, carefully lift the circular actuator link tab (5). Remove link (4) from window ball socket (4). See: Service and Repair/Vent
Window Motor Armature - Removal.
5. Remove bolts (2) holding power vent motor to D-pillar.
6. Remove power vent motor.
