Grand Caravan V6-3.8L (2009)
NOTE: Left side door shown in illustrations. Right side door similar.
NOTE: If the door glass will not move in the door, remove the regulator motor and manually position the window regulator and glass to the
appropriate position.
1. With the door glass in the full down position, remove the door trim panel. See: Body and Frame/Doors, Hood and Trunk/Doors/Sliding
Door/Sliding Door Interior Trim Panel/Service and Repair/Door Trim Panel - Removal.
2. Remove the rear applique. .
3. Remove the close-out plugs from the door module assembly.
NOTE: Illustration shown with carrier plate removed for clarity.
4. Working through the close-out plugs in the door module assembly, carefully back off attach nuts from the glass brackets to disengage from
liftplates on the window regulator.
WARNING: Use care when removing the door glass to prevent breakage. Do not force the glass out of the door. Failure to follow this warning
may result in serious injury.
5. Remove the rear glass run attachment fasteners and push the glass run rearward to allow the glass to be removed.
6. Remove the sliding door glass from the window opening. Tip the top edge of glass outward and then lift the glass out of the opening.
