Grand Caravan V6-3.8L VIN L (2007)
Figure 1 SPLICE BAND
4. Using crimping tool, Mopar p/n 05019912AA, crimp the splice clip and wires together (Figure 2).
Figure 2 CRIMPING TOOL
5. Solder the connection together using rosin core type solder only (Figure 3).
CAUTION: DO NOT USE ACID CORE SOLDER.
Figure 3 SOLDER SPLICE
6. Center the heat shrink tubing over the joint and heat using a heat gun. Heat the joint until the tubing is tightly sealed and sealant comes out of both