Grand Caravan V6-3.8L VIN L (2007)
Body Control Module: Service and Repair
Body Control Module
Removal
REMOVAL
1. Disconnect and isolate the battery negative cable.
2. Remove the lower instrument panel silencer.
3. Remove the knee blocker and reinforcement.
4. Disconnect the five wire connectors from the bottom of the Body Control Module (BCM).
5. Move bulkhead wiring aside.
6. Remove the screws holding the BCM to the bulkhead.
7. Remove the BCM from the mounting bracket.
Installation
INSTALLATION
1. Install the BCM to the mounting bracket.
2. Install the screws holding the BCM to the bulkhead.
3. Connect the five wire connectors to the bottom of the Body Control Module (BCM).
4. Install the knee blocker and reinforcement.
5. Install the lower instrument panel silencer.
6. Connect the battery negative cable.
7. Verify proper operation of BCM and its functions.