Grand Caravan V6-3.8L VIN L (2007)
Front Door Exterior Handle: Service and Repair
Front Door Exterior Handle - Installation
INSTALLATION
If outside door handle replacement is necessary, transfer lock cylinder from the original handle to the new one.
1. Place outside door handle in position on vehicle.
2. Install nuts attaching outside door handle to door outer panel (Figure 1). Tighten nuts to 6 Nm (50 in. lbs.).
3. Insert lock linkage into door latch.
4. Engage clip to hold door lock linkage to latch.
5. Insert latch linkage into door latch.
6. Engage clip to hold door latch linkage to latch.
7. Install push-in fasteners to hold VTSS switch harness to inner door reinforcement bar, if equipped.
8. Connect VTSS switch connector into door harness, if equipped.
9. Verify door latch operation.
10. Install sound shield and door trim panel.
Figure 1 OUTSIDE DOOR HANDLE
