Grand Caravan V6-3.8L VIN L (2007)
Power Sliding Door Motor: Service and Repair
Installation
INSTALLATION
1. Position the lower drive unit near the lower hinge.
2. Connect the flex drive assembly on the lower drive unit. Push the flex drive collar straight on until the it snaps in place (Figure 1). It may be
necessary to rotate the drive unit slightly until the flex drive seats in place.
Figure 1 LOWER DRIVE UNIT
3. Install the lower drive unit retaining fasteners(Figure 2). Torque the larger allen headed center stud to 9 Nm (80 in.lbs.). Torque the smaller screw
to 3 Nm (28 in.lbs.).
Figure 2 LOWER DRIVE UNIT RETAINING FASTENERS