Grand Caravan V6-3.8L VIN L (2007)
Sliding Door Hold-Open Latch: Service and Repair
Sliding Door Hold Open Latch
Removal
REMOVAL
1. Open sliding door.
2. Remove sliding door sill plate. Refer to Trim Panel.
3. Remove nuts attaching hold open latch to lower roller arm (Figure 1).
4. Remove hold open latch from lower arm.
5. Disconnect cable from hold open latch.
6. Remove hold open latch from vehicle.
Figure 1 SLIDING DOOR HOLD OPEN LATCH
Installation
INSTALLATION
1. Place hold open latch in position on vehicle.
2. Connect cable to hold open latch.
3. Place hold open latch in position on lower arm.
4. Install nuts attaching the hold open latch to lower roller arm. Tighten nuts to 5 Nm (45 in. lbs.) torque.
5. Install sliding door sill plate.
6. Verify sliding door operation.
