Grand Caravan V6-3.8L VIN L (2007)
Sliding Door Latch: Service and Repair
Sliding Door Latch / Lock Assembly
Removal
REMOVAL
1. Remove sliding door trim panel.
2. Remove sliding door stop bumper.
3. Peel watershield away from adhesive around perimeter of inner door panel.
4. Disengage external cable from latch/lock assembly (Figure 1).
5. Remove foam block.
6. Remove inside door handle assembly.
7. Disengage inside cable from latch/lock assembly.
8. Disengage link from bellcrank.
9. Disengage hold open latch cable from lower hinge.
10. Remove bolts attaching latch/lock control to sliding door (Figure 2).
11. If equipped, lower latch and disconnect wire connector from power door lock motor.
12. Remove latch/lock from door.
Figure 1 SLIDING DOOR LATCH/LOCK ASSEMBLY
