dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Carpets and Floor Mats|Page 10952 > < Arm Rest|Armrest|Page 10947
Page 1
background image

Carpet: Service and Repair
Carpets and Floor Mats

Removal

REMOVAL

1.   Remove front seats.  

2.   Remove front center console.

3.   Remove heel blocker (plastic block below accelerator pedal).

4.   Remove the remaining seats. Refer to the Owner's Manual for the proper procedures.

5.   Remove front cowl panels and sill plates.

6.   Remove sliding door sill plates.  

7.   Remove the cargo organizer, if equipped.

8.   Remove liftgate scuff plate. 

9.   Remove lower B-pillar trim covers.

10.  Remove D-pillar trim covers.

11.  Remove Quarter trim panels.

12.  Remove floor escutcheons (Figure 1).

13.  Remove the floor console trays. 

14.  Remove push pin fasteners attaching carpet to floor in front seat and rear area.

15.  Roll carpet from under instrument panel to center of sliding door.

16.  Roll and fold carpet forward away from rear door opening.

17.  Extract carpet through sliding door opening (Figure 2).

Figure 1 SEAT ESCUTCHEONS

Carpets and Floor Mats|Page 10952 > < Arm Rest|Armrest|Page 10947