Grand Caravan V6-3.8L VIN L (2007)
Installation
INSTALLATION
NOTE: The driver's side a double ended stud is used. A nut has to be removed for the seat belt anchor removal and the stud for the retractor
removal.
NOTE: On the passenger side there is a belt tension sensor.
1. On the passenger side secure grommet to seat belt sensor connector into bottom of B-pillar lower trim prior to install B-pillar lower trim cover.
2. Place lower B-pillar trim cover in position on vehicle (Figure 1).
3. Insert seat belt through hole in lower B-pillar trim.
4. Engage hidden clips attaching lower trim cover to B-pillar.
5. Install access cover.
6. Install upper B-pillar trim cover.
7. Place seat belt anchor in position on floor so webbing is pointed rearward and slightly outboard.
8. Install bolt/nut attaching lower seat belt anchor to floor. Tighten seat belt anchor bolt/nut to 39 Nm (29 ft. lbs.) torque.
9. Verify that seat belt anchor does not interfere with seat track travel.
Figure 1 LOWER B-PILLAR TRIM COVER
