Grand Caravan V6-3.8L VIN L (2007)
Sunroof / Moonroof Motor: Adjustments
ADJUSTMENT
CAUTION: THE IS NO ADJUSTMENT AVAILABLE FOR A NORMALLY OPERATING SUNROOF. THIS PROCEDURE IS USE TO SET
SUNROOF MOTOR TO SUNROOF ASSEMBLY TIMING.
1. Manually push the sunroof guide assembly to the full forward position until it is locked into position. This is verified by attempting to push the
guide assembly rearward. (Figure 1)
Figure 1 SUNROOF GUIDE LOCK POSITION
NOTE: The guide rail will be raised above the U-frame assembly when in the lock position.
2. Remove the sunroof glass.
3. Manually move the guide pivot inside the guide rail cam slot until it is centered between the etched timing marks on both rails.(Figure 2)
